Unisex Zipper
Black Zipper with front, sleeves and back print
80% cotton, 20% polyester
Weight: 290 g/m²
Brand: Starworld
Model: Zip Through Hooded Sweat Jacket
Combed cotton
Kangaroo pocket
Hood
Brushed back fleece
Twin needle stitching
Double layer hood with antique brass eyelets and wide self coloured draw cord
Covered zip
Drop forward shoulder seams for better comfort
Heavy rib with elastane in cuffs and waistband
Pre-shrunk and anti-pilling finish
Oeko-Tex® Standard 100 certified
SEDEX audited
| SIZE |
WIDTH |
LENGTH |
| S |
52,0 cm |
68,0 cm |
| M |
55,0 cm |
70,0 cm |
| L |
58,0 cm |
72,0 cm |
| XL |
61,0 cm |
74,0 cm |
| 2XL |
64,0 cm |
76,0 cm |
| 3XL |
72,0 cm |
69,0 cm |
| 4XL |
77,0 cm |
69,0 cm |
| 5XL |
82,0 cm |
69,0 cm |
Width: Measure across garment 1cm down from armholes
Length: Measure from highest point of shoulder to bottom edge of garment
Warning: The product images on the website are generated automatically. The color, raster and size of the print may differ on the textile (darker, lighter, slightly smaller or slightly larger). The maximum print size (front or back) of all our T-shirts, Zippers, Hoodies etc. (it doesn't matter if S or 5XL) is A3 (width approx. 29 cm, length approx. 41 cm). However, we do our best to make the finished product as close as possible to the image.
CARE AND WASHING INSTRUCTIONS
Pay attention to these care and washing tips to increase the life of your zipper:
- Wash only by hand and not hotter than 30 degrees.
- The printed surface should NEVER touch the hot iron.
- Several printed surfaces should NOT touch during ironing (for example, if a motif has been printed on the chest and back and touched on the rolled up zipper).
- Do not use chemical cleaning agents for cleaning.
- The zipper should not be tumble dried.
